P-200 P-260 P-320 PET Preform Ente Molding System

Tlhaloso e Khutšoanyane:

Ho pholile ka hare ho preform ntle le ho sebelisa moea o hatelitsoeng ka khatello e phahameng , ho fapana le mekhoa e mengata ea ho pholisa ka mor'a hlobo e pholileng feela bokantle ba ka ntle.

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

Ho pholile ka hare ho preform ntle le ho sebelisa moea o hatelitsoeng ka khatello e phahameng , ho fapana le mekhoa e mengata ea ho pholisa ka mor'a hlobo e pholileng feela bokantle ba ka ntle.

2.Ts'ebeliso e ntlafalitsoeng ea potoloho - ha e behiloe holim'a platen e tsamaeang, sistimi ea pholiso e lula e sebetsa ka har'a 85% ea nako eohle ea potoloho.

3.Bokhoni ba ho bopa ente ea PET ho tloha ho lithane tse 230 ho isa ho tse 320 (2000KN ho isa ho 3200KN), 'me e fumaneha bakeng sa boholo ba hlobo ea preform e nang le li-cavities tse 96.

Litlhaloso

MOHLALA		THUTO	P-200	P-260	P-320
Setsi sa Ente	Screw Diameter	mm	70	75	80
	Screw L/D Karolelano		25	25	25
	Thunya Molumo	cm3	1016	1378	1689
	Ente Weight PET	g	1087	1474	1807
	Sekhahla sa Ente	g/s	482	496	605
	Khatello ea Ente	Mpa	105	127	130
	Screw Speed	rpm	110	120	120
Sehlopha sa Clamping	Matla a Tlatsetsang	kn	2000	2600	3200
	Moving Plate Stroke	mm	490	550	585
	Max.Mould Height	mm	540	580	720
	Min.Mould Height	mm	200	200	300
	Sekhoba sa Tie Bars(W×H)	mm	530×530	580×580	660×760
	Matla a ejector	kn	80	126	180
	Ejector Stroke	mm	140	150	180
	Nomoro ea Ejector	n	5	5	9
Ba bang	Khatello e phahameng ea Pompo	Mpa	16	16	16
	Pump Motor Power	kw	30	37	44
	Matla a ho futhumatsa	kw	28	32	37
	(L×W×H)Boholo	M	6×1.5×1.6	6.8×1.6×1.8	7.7×1.8×2
	Boima ba Mochini	T	7	8.5	13