Bench Lathe Machine C0636A
Likaroloana
Tsela ea tataiso le likere tsohle tse hloohong li thatafetse ebile li le fatše ka nepo.
Sisteme ea spindle e thata haholo ebile e nepahetse.
Mechini e na le terene e matla ea li-head stock gear, ho nepahala ho potoloha le ho matha hamonate ka lerata le tlase.
Sesebediswa sa polokeho e ngata haholo se fanoe hodima apron.
Sesebelisoa sa pedal kapa electromagnetic braking.
Setifikeiti sa teko ea mamello, chate ea phallo ea teko e kenyelelitsoe
1. Libethe tsa libethe li thata ka mokhoa o nepahetseng
2. The spindle e tšehetsoa takatso e nepahetseng rolara libering
3. Lisebelisoa tsa li-headstock li entsoe ka tšepe ea boleng bo phahameng, fatše le ho thatafala
4. Lekhalo le tlosoang le fanoa bakeng sa mosebetsi o moholo oa bophara
5. Ho bonolo ho fetola lebelo la ho sebetsa ka lebelo
6. Lebelo la lebelo la spindle 70 ~ 2000r / min
7. Libethe tse peli tse fapaneng tsa bolelele li teng
8. Lebokose la lisebelisoa tse bonolo tsa ho sebetsa le na le lisebelisoa tse fapaneng le ts'ebetso ea ho seha likhoele
9. D1-4 camlock spindle nko
Litlhaloso
| MEHLALA | C0636A |
| Qhobetsa hodima bethe | 360mm(14") |
| Tsamaea holim'a cross slide | 224mm(8-13/16") |
| Swing ka bophara ba lekhalo | 502mm(19-3/4") |
| Swing ka bolelele | 210mm(8-1/4") |
| Bophahamo ba bohareng | 179mm(7") |
| Sebaka pakeng tsa setsi | 750mm(30")/1000mm(40") |
| Bophara ba bethe | 187mm(7-3/8") |
| Bolelele ba bethe | 1405mm(55-5/16") |
| Bophahamo ba bethe | 290mm(11- 13/32") |
| Spindle bore | 38mm(1-1/2") |
| Nko ya spindle | D1-4" |
| Taper nkong | MT NO.5 |
| Taper ka sleeve | MT NO.3 |
| Nomoro ea lebelo | 8 |
| Lebelo la lebelo la spindle | 70-2000 r/min |
| Cross slide bophara | 130mm(5-3/32″) |
| Ho tsamaea ka li-slide | 170mm(6-11/16") |
| Bophara ba phomolo ea motsoako | 80mm(3-1/8″) |
| Leeto la phomolo le kopaneng | 95mm(3-9/16") |
| Bophara ba screw screw | 22mm(7/8″) |
| Khoele ea sekoti sa lead | 8T.PI kapa 3mm |
| Bophara ba molamu oa fepa | 19mm(3/4") |
| Karolo e kholo ea lisebelisoa tsa ho itšeha | 16mm×16mm(5/8"×5/8") |
| E kopanya libaka tsa borena | 34 Nos.4-56 TPI |
| Methapo ea metric | 26 Nos.0.4-7 MP |
| Lijo tsa longitudinal tsa borena | 32 Nos.0.002-0.548"/Tšen |
| Metric ea phepelo ea longitudinal | 32 Nos.0.052-0.392mm/Tšen |
| Cross feeds imperial | 32 Nos.0.007-0.0187"/Tšen |
| Cross feeds metric | 32 Nos.0.014-0.380mm/Tšen |
| Quill bophara | 32mm(1-1/4") |
| Ho tsamaea ka quill | 100mm(3-15/16") |
| Quill taper | MT NO.3 |
| Bakeng sa enjene e kholo | 2HP, 3PH kapa 2PH, 1PH |
